美國紐曼蒂克(numatics)圓形氣缸 numatics詳情如下：
美國紐曼蒂克圓形氣缸輸出力的大小。活塞要在缸筒內做平穩的往復滑動，缸筒內表面的表面粗糙度應達到Ra0.8um。對鋼管缸筒，內表面還應鍍硬鉻，以減小摩擦阻力和磨損，并能防止銹蝕。缸筒材質除使用高碳鋼管外，還是用高強度鋁合金和黃銅。小型氣缸有使用不銹鋼管的。帶磁性開關的圓形氣缸或在耐腐蝕環境中使用的氣缸，缸筒應使用不銹鋼、鋁合金或黃銅等材質。
 紐曼蒂克(numatics)圓形氣缸
 美國紐曼蒂克圓形氣缸中的受壓力零件。為防止活塞左右兩腔相互竄氣，設有活塞密封圈?；钊系哪湍キh(huán)可氣缸的導向性，減少活塞密封圈的磨耗，減少摩擦阻力。耐磨環長使用聚氨酯、聚四氟乙烯、夾布合成樹脂等材料?；钊膶挾扔擅芊馊Τ叽绾捅匾幕瑒硬糠珠L度來決定。滑動部分太短，易引起早期磨損和卡死?；钊牟馁|(zhì)常用鋁合金和鑄鐵，小型缸的活塞有黃銅制成的。
 美國紐曼蒂克圓形氣缸示意圖氣缸兩邊都是空心的活塞桿內的永磁鐵帶動活塞桿外的另個磁體(運動部件)我想說的是它對清潔度要求蠻高的我們的磁偶的無桿氣缸經常要拆下來汽油清洗可能與它的工作環境吧。

：黃/王
：/

:/
電子郵件；
格比,歡迎訂購!!! （含稅17%）!
 

美國紐曼蒂克(numatics)圓形氣缸 numaticsL01SA4592000060、 L01SA4592000061、 L01SA4594G00020、L01SA4594G00030、
L01SA4594G00040 、L01SA4594G00060 、L01SA4594G00061、 L01SA4594000020
、L01SA4594000030 、L01SA4594000040 、L01SA4594000060、 L01SA4594000061
、L01SA459OG00020、 L01SA459OG00030 、L01SA459OG00040 、L01SA459OG00060
、L01SA459OG00061、L12BA452OG12A30、 L12BA452OG12A40、 L12BA452OG12A60
、L12BA452OG12A61 、L12BA452OG12B20、 L12BA452OG12B30
、L12BA452OG12B40、L12BA452O000020 、L12BA452O000030、 L12BA452O000040
、L12BA452BG17G20 、L12BA452BG17G30 、L12BA452BG17G60
、L21BA552BG00020、081SA43AMG00061 、081SA43AMG11Z20 、081SA43AMG00060
、081SA43AM000061 、081SA43AM012A20 、081SA63CK011B60 、081SA5252000020...
 081SS6014G11Z40 081SA425MG11B40 081SA43AK012B60 081SA625K012B61 081SS6254012A40
美國NUMATICS圓形氣缸_紐曼蒂克圓形氣缸
● Valves can also be supplied with EPDM (ethylene-propylene), CR (chloroprene) and PTFE seals
and discs. Use the appropriate optional suffix letter for identification
● Encapsulated, EEx m, for hazardous locations according to “ATEX/CENELEC” and national standards
● Plug with visual indication and with peak voltage suppression or with cable length of 2m
● Valves are suitable for sub-base gangmounting and can be supplied with manifolds up to 4, 8 or 12 valves, if requested
● The valves can be mounted in any position without affecting operation
● 2 mounting holes are provided in the body
● Pipe connection identifier is: G = (ISO 228/1)
● Installation/maintenance instructions are included with each valve
l A rugged flameproof solenoid operator conforming to European CENELEC
Explosion Protection Standards EN 50014 and EN 50018, EEx d
l The solenoid is certified by the British Approvals Service for Equipment in
Flammable Atmospheres (BASEEFA)
l The operator is available as pull and push type solenoid and can be
installed on certain normally open and normally closed valves
l The enclosure is of the direct cable entry construction and is waterproof IP65
CONSTRUCTION
Solenoid enclosure Expoxy coated cast iron (BS1452 GR17
Bonnet Steel (zinc plated)
Cover screws Stainless steel
Safety code EEx d IIC T3/T4/T5/T6
美國紐曼蒂克(numatics)圓形氣缸 numatics